AdvaQuartz is a three component, multi-coloured epoxy resin floor system. It provides an extremely decorative, hard wearing, slip-resistant floor topping with enhanced chemical resistance. An attractive standard range of colour mixes exists, although individual designs can be custom made in an infinite array of colour designs.
Click on each of the colour icons to see how Advanced's range of AdvaQuartz colours could look in your business.
Available in Poppy Red, Royal Blue, Moss Green, Sahara and Vanilla.
Chemical resistance: Excellent resistance to dilute acids and alkalis, oil, petrol, diesel, vegetable oils, and fruit juices.
As a decorative, hygienic, and durable floor screed where aesthetics are an important consideration e. g. food production, electronic and engineering industries, high profile commercial and retail showrooms, corporate amenities, printing, pharmaceutical production, hospitals, etc.
A Concrete shall be a minimum of 21 days old and/or the residual moisture content shall be below 6%. Ensure that the concrete is clean and free from dust, laitance, grease, oil, curing compound, existing paint finishes, etc. Blow holes and defective concrete shall be made good using a proprietary repair compound. Suitable mechanical treatment, such as vacuum grit blasting is the preferred treatment prior to application, as this ensures a mechanical ‘key ’ which will optimise adhesion.
B Steel surfaces shall be shot blasted or grit blasted to a nominal Sa 2.5 Swedish Standard. All dust shall be removed prior to coating application. A coat of ADVAPRIME shall be applied as soon as practicable after blasting, in order to obviate the possible occurrence of ‘flash rusting’.
Concrete surfaces shall be primed with a coat of ADVAPRIME, applied by brush, roller or airless spray at the nominal rate of 0.25 kg/m2. Long nap lambs wool rollers are recommended for primer application. Allow primer to cure for a minimum of 30 minutes or until sufficiently tacky. Do not allow to become tack-free. If so, re-prime.
ADVAQUARTZ is supplied as a three pack material consisting of the RESIN component, CURING AGENT component and the COLOURED QUARTZ AGGREGATE component. Add the CURING AGENT component to the RESIN component and mix thoroughly, preferably by mechanical means for a minimum of 2 minutes. Pour the contents into a mixing vessel, and add the COLOURED QUARTZ component whilst stirring. A low speed drill with paddle attachment may be used or a forced action mixer e.g. Cretangle type.
Spread the ADVAQUARTZ to the desired thickness and trowel finish.
As a decorative, hygienic and durable floor screed where aesthetics are an important consideration, e.g. food production, electronic and engineering industries, high profile commercial and retail showrooms, corporate amenities, printing, pharmaceutical production and hospitals etc.
Various colours available, please consult with manufacturer for exact details.
